BMW M2 2017 Owner's Manual – Page 184

Posted on 1 Jan, 2020
Manufacturer: BMW
Category: Auto
Product: BMW M2 2017
Pages: 230
File size: 4 MB

If non-original light-alloy wheels of the ve‐
hicle manufacturer are mounted, the ac‐
companying lug bolts may have to be used
as well.
3.
Hand-tighten the remaining lug bolts and
tighten all bolts well in a crosswise pattern.
4.
Turn the crank on the vehicle jack counter‐
clockwise to retract the jack and lower the
vehicle.
5.
Remove the vehicle jack.
After the wheel change
1.
Tighten the lug bolts crosswise. The tight‐
ening torque is 101 lb ft/140 Nm.
2.
Stow the nonworking wheel in the cargo
area.
The nonworking wheel cannot be stored
under the cargo floor panel because of its
size.
3.
Check tire inflation pressure at the next op‐
portunity and correct as needed.
4.
Reinitialize the Flat Tire Monitor.
Reset the Tire Pressure Monitor.
5.
Check to make sure the lug bolts are tight
with a calibrated torque wrench.
6.
Drive to the nearest dealer’s service center
or another qualified service center or repair
shop to have the damaged tire replaced.
Seite 184
Mobility
Wheels and tires
184
Online Edition for Part no. 01402978584 - II/17