BMW M2 2017 Owner's Manual – Page 198

Posted on 1 Jan, 2020
Manufacturer: BMW
Category: Auto
Product: BMW M2 2017
Pages: 230
File size: 4 MB

Tail lamps, bulb replacement
Overview
1
Turn signal
2
Top brake lamp
3
Reversing lamp
4
Rear lamp
5
Bottom brake lights
Bulb replacement
General information
Observe the safety information, refer to
page 196.
Turn signal, brake light, tail light and reversing
light: 21-watt bulb, P21W.
Upper brake light: 21-watt bulb, H21W.
Removing the tail lamp
1.
Open tailgate.
2.
Open the two covers on the tail lamp.
3.
With the handle of the screwdriver from the
onboard vehicle tool kit, loosen and re‐
move the nuts on the two fasteners. Make
sure that the nuts do not drop into the
bumper area. In addition to the two outer
fasteners, there is another inner fastener.
4.
Hold the grip rail in one hand, arrow 1, and
brace against the outside with your other
hand, arrow 2. Carefully pry out the tail
lamp, arrow 3, until the rubber mount re‐
leases from the inner fastener.
5.
Remove the plug from the bulb holder.
Replacing the bulbs
1.
Loosen the six fasteners on the tail lamp,
arrows 1, and remove the tail lamp from the
lamp holder, arrow 2.
2.
Press the nonworking bulb gently into the
socket, turn counterclockwise and remove.
Seite 198
Mobility
Replacing components
198
Online Edition for Part no. 01402978584 - II/17