BMW M2 2017 Owner's Manual – Page 42

Posted on 1 Jan, 2020
Manufacturer: BMW
Category: Auto
Product: BMW M2 2017
Pages: 230
File size: 4 MB

If the vehicle is unlocked using a remote con‐
trol, the assigned personal driver profile will be
activated. All settings stored in the driver pro‐
file are automatically applied.
If several drivers use their own remote control,
the vehicle will adjust the personal settings
during unlocking. These settings are also re‐
stored, if the vehicle has been used in the
meantime by a person with a different remote
control.
Changes to the settings are automatically
stored in the driver profile currently activated.
If another driver profile is selected via iDrive,
the settings stored in it will be applied auto‐
matically. The new driver profile is assigned to
the remote control currently used.
There is an additional guest profile available
that is not assigned to any remote control: it
can be used to apply settings in the vehicle
without changing the personal driver profiles.
Functional requirements
For the system to be able to identify the driver
profile associated to a particular driver, the de‐
tected remote control must be clearly allo‐
cated to the driver.
This is the case when:
The driver is only carrying his or her own
remote control.
The driver unlocks the vehicle.
The driver gets into the vehicle through the
driver's door.
Settings
The settings for the following systems and
functions are stored in the active profile. The
scope of storable settings depends on country
and equipment.
Unlocking and locking.
Lights.
Climate control.
Radio.
Instrument cluster.
Programmable memory buttons.
Volumes, tone.
Control Display.
Navigation.
PDC Park Distance Control.
Rearview camera.
Driving Dynamics Control.
Driver's seat position, exterior mirror posi‐
tion, steering wheel position.
Intelligent Safety.
Profile management
Opening profiles
Regardless of the remote control in use, a dif‐
ferent profile may be activated. This allows you
to call up personal vehicle settings, even if you
did not unlock the vehicle with your own re‐
mote control.
Using iDrive:
1.
"Settings"
2.
"Profiles"
3.
Select a profile.
The following functions are executed:
All settings stored in the called-up profile
are automatically applied.
The called-up profile is assigned to the re‐
mote control being used at the time.
If the profile is already assigned to a differ‐
ent remote control, this profile will apply to
both remote controls.
Using a guest profile
The guest profile is for individual settings that
are stored in none of the three personal pro‐
files.
Using iDrive:
1.
"Settings"
2.
"Profiles"
Seite 42
Controls
Opening and closing
42
Online Edition for Part no. 01402978584 - II/17