BMW M2 2017 Owner's Manual – Page 65

Posted on 1 Jan, 2020
Manufacturer: BMW
Category: Auto
Product: BMW M2 2017
Pages: 230
File size: 4 MB

marked with a pair, 2, of LATCH symbols.
Before installing LATCH child
restraint fixing systems
Pull the safety belt away from the area of the
child restraint system.
Assembly of LATCH child restraint
fixing systems
1.
Install child restraint system, see manufac‐
turer's information.
2.
Ensure that both LATCH anchors are prop‐
erly connected.
Child restraint systems with tether
strap
Mounting points
The respective symbol shows the an‐
chor for the upper retaining strap.
Seats with an upper top tether are
marked with this symbol. It can be found on
the rear seat backrest or the rear window shelf.
Safety information
NOTE
The mounting points for the upper re‐
taining straps of child restraint systems are
only provided for these retaining straps. When
other objects are mounted, the anchors can be
damaged. There is a risk of property damage.
Only mount child restraint systems to the up‐
per retaining straps.◀
Routing the retaining strap
WARNING
If the upper retaining strap is incorrectly
used for the child restraint system, the protec‐
tive effect can be reduced. There is a risk of in‐
jury. Make sure that the upper retaining strap is
not guided across sharp edges and without
twisting to the upper retaining strap.◀
1
Direction of travel
2
Head restraint
3
Hook for upper retaining strap
4
Anchor
5
Rear window shelf
6
Seat backrest
7
Upper retaining strap
Attaching the upper retaining strap to
the anchor
1.
Remove the anchor cover.
2.
Raise the head restraint.
3.
Guide the upper retaining strap between
the supports of the head restraint.
4.
Attach the hook of the retaining strap to
the anchor.
5.
Tighten the retaining strap by pulling it
down.
6.
Lower and lock head restraints as needed.
Seite 65
Transporting children safely
Controls
65
Online Edition for Part no. 01402978584 - II/17