Bosch GST 150 CE User Manual – Page 9

Posted on 8 May, 2019
Manufacturer: Bosch
Category: Jigsaws
Product: Bosch GST 150 CE
Pages: 197
File size: 26 MB

English |
Bosch Power Tools
1 609 92A 2BV | (26.1.16)
General Power Tool Safety Warnings
Read all safety warnings and all in-
Failure to follow the warnings
and instructions may result in electric shock, fire and/or seri-
ous injury.
Save all warnings and instructions for future reference.
The term “power tool” in the wa
rnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
Work area safety
Keep work area clean and well lit.
Cluttered or dark areas
invite accidents.
Do not operate power tools
in explosive atmospheres,
such as in the presence of flammable liquids, gases or
Power tools create sparks which may ignite the dust
or fumes.
Keep children and bystanders away while operating a
power tool.
Distractions can cause you to lose control.
Electrical safety
Power tool plugs must match the outlet. Never modify
the plug in any way. Do no
t use any adapter plugs with
earthed (grounded) power tools.
Unmodified plugs and
matching outlets will reduce risk of electric shock.
Avoid body contact with eart
hed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will
increase the risk of electric
Do not abuse the cord. Never
use the cord for carrying,
pulling or unplugging the po
wer tool. Keep cord away
from heat, oil, sharp edges and moving parts.
or entangled cords increase
the risk of electric shock.
When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use.
Use of a cord suitable
for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected
Use of an RCD reduces the risk of electric shock.
Personal safety
Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or un
der the influence of drugs,
alcohol or medication.
A moment of inattention while op-
erating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye
Protective equipment
such as dust mask,
non-skid safety shoes, hard
hat, or hearing protection
used for appropriate conditions will reduce personal inju-
Prevent unintentional starting. Ensure the switch is in
the off-position before co
nnecting to power source
and/or battery pack, picking
up or carrying the tool.
Carrying power tools with your finger on the switch or en-
ergising power tools that have
the switch on invites acci-
Remove any adjusting key or wrench before turning
the power tool on.
A wrench or a key left
attached to a ro-
tating part of the power tool
may result in personal injury.
Do not overreach. Keep proper footing and balance at
all times.
This enables better control of the power tool in
unexpected situations.
Dress properly. Do not wear
loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
moving parts.
Loose clothes, jewellery or long hair can be
caught in moving parts.
If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used.
Use of dust collection can re-
duce dust-related hazards.
Power tool use and care
Do not force the power tool. Use the correct power tool
for your application.
The correct power tool will do the
job better and safer at the ra
te for which it was designed.
Do not use the power tool if
the switch does not turn it
on and off.
Any power tool that cannot be controlled with
the switch is dangerous
and must be repaired.
Disconnect the plug from the power source and/or the
battery pack from the powe
r tool before making any
adjustments, changing accessories, or storing power
Such preventive safety measures reduce the risk of
starting the power
tool accidentally.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool.
tools are dangerous in the hands of untrained users.
Maintain power tools. Check
for misalignment or bind-
ing of moving parts, breakage of parts and any other
condition that may affect the
power tool’s operation. If
damaged, have the power to
ol repaired before use.
Many accidents are caused by poorly maintained power
Keep cutting tools sharp and clean.
Properly maintained
cutting tools with sharp cutting
edges are less likely to bind
and are easier to control.
Use the power tool, accessories
and tool bits etc. in ac-
cordance with these instruct
ions, taking into account
the working conditions and th
e work to be performed.
Use of the power tool for oper
ations different from those
intended could result in
a hazardous situation.
Have your power tool serviced
by a qualified repair per-
son using only identical replacement parts.
This will en-
sure that the safety of th
e power tool is maintained.
esday, January 26, 2016 8:36 AM