LG Full HD 42LF652V User Manual – Page 16

Posted on 23 Sep, 2019
Manufacturer: LG
Category: Sound
Product: LG Full HD 42LF652V
Pages: 292
File size: 24 MB

16
ENGLISH
How to use magic remote
y
Shake the Magic Remote slightly to the right and le
ft or press
(HOME)
,
(INPUT)
,
buttons to make the pointer appear on
the screen.
(In some TV models, the pointer will appear when you turn the
Wheel (OK)
button.)
y
If the pointer has not been used for a certain period of time or Magic
Remote is placed on a flat surface, then the pointer will disappear.
y
If the pointer is not responding smoothly, you can reset the pointer
by moving it to the edge of the screen.
y
The Magic Remote depletes batteries faster than a normal remote
due to the additional features.
Precautions to take when using the
magic remote
t
Use the remote control within the speci!ed range (within 10 m).
You may experience communication failures when using the device
outside the coverage area or if there are obstacles within the
coverage area.
t
You may experience communication failures depending on the
accessories.
Devices such as a microwave oven and wireless LAN operate in the
same frequency band (2.4 GHz) as the Magic Remote. This may
cause communication failures.
t
The Magic Remote may not work properly if a wireless router (AP)
is within 1 meter of the TV.
Your wireless router should be more than 1 m away from the TV.
t
Do not disassemble or heat the battery.
t
Do not drop the battery. Avoid extreme shocks to the battery.
t
Inserting the battery in the wrong way may result in explosion.
Licenses
Supported licenses may di"er by model. For more information about
licenses, visit
www.lg.com
.
Open source software
notice information
To obtain the source code under GPL, LGPL, MPL, and other open source
licenses, that is contained in this product, please visit
http://opensource.
lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM
for a charge covering the cost of performing such distribution (such
as the cost of media, shipping, and handling) upon email request to
[email protected] This o"er is valid for three (3) years from the date
on which you purchased the product.
Troubleshooting
Cannot control the TV with the remote control.
t
Check the remote control sensor on the product and try again.
t
Check if there is any obstacle between the product and the remote
control.
t
Check if the batteries are still working and properly installed (
to
,
to
).
No image display and no sound is produced.
t
Check if the product is turned on.
t
Check if the power cord is connected to a wall outlet.
t
Check if there is a problem in the wall outlet by connecting other
products.
The TV turns o" suddenly.
t
Check the power control settings. The power supply may be
interrupted.
t
Check if the
Automatic Standby
(Depending on model) /
Sleep
Timer
/
Timer Power Off
is activated in the
TIMERS
settings.
t
If there is no signal while the TV is on, the TV will turn o"
automatically after 15 minutes of inactivity.
When connecting to the PC (HDMI), ‘No signal’ or ‘Invalid Format’ is
displayed.
t
Turn the TV o"/on using the remote control.
t
Reconnect the HDMI cable.
t
Restart the PC with the TV on.