Makita 18v Lxt Lithium-ion Compact Brushless Cordless 1/2" Driver-drill Kit (2.0ah) Instruction Manual – Page 2
Posted on 11 Jun, 2019
Product: Makita 18v Lxt Lithium-ion Compact Brushless Cordless 1/2" Driver-drill Kit (2.0ah)
Model Number: XFD12R
File size: 4 MB
ENGLISH (Original instructions)
13 mm (1/2")
38 mm (1-1/2")
10 mm x 90 mm (3/8" x 3-1/2")
No load speed (RPM)
0 - 2,000 /min
0 - 500 /min
172 mm (6-3/4")
D.C. 18 V
Standard battery cartridge
BL1830, BL1830B, BL1840B,
1.5 kg (3.4 lbs)
1.8 kg (3.9 lbs)
to our continuing
may differ from country
General power tool safety warnings
Read all safety warnings and all
Failure to follow the warnings and instruc
tions may result in electric
Save all warnings and instruc-
tions for future reference.
The term "power
tool" in the warnings
refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
Keep work area clean and well lit.
dark areas invite accidents.
Do not operate power tools in explosive atmo
spheres, such as in the presence of flammable
liquids, gases or dust.
Power tools create sparks
which may ignite the dust or fumes.
Keep children and bystanders away while
operating a power tool.
Distractions can cause
you to lose control.
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
plugs and matching
reduce risk of electric shock.
Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
is an increased
risk of elec
tric shock if your body is earthed or grounded.
Do not expose power tools to rain or wet con
Water entering a power tool will increase
the risk of electric shock.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts.
Damaged or entangled cords
increase the risk of electric shock.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of a cord
suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is
unavoidable, use a ground fault circuit inter-
rupter (GFCI) protected supply.
Use of a GFCI
reduces the risk of electric shock.
Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or med
power tools may result in serious
Use personal protective equipment. Always
wear eye protection.
Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool.
Carrying power tools with
your finger on the switch
that have the switch on invites accidents.
Remove any adjusting key or wrench before
turning the power tool on.
or a key left
attached to a rotating part of the power tool may
result in personal