Makita 18v Lxt Lithium-ion Compact Brushless Cordless 1/2" Driver-drill, Tool Only Instruction Manual – Page 6
Posted on 11 Jun, 2019
Product: Makita 18v Lxt Lithium-ion Compact Brushless Cordless 1/2" Driver-drill, Tool Only
Model Number: XFD12Z
File size: 4 MB
Lighting up the front lamp
Do not look in the light or see the
source of light directly.
Pull the switch
to light up the lamp. The lamp
keeps on lighting while the switch trigger is being pulled.
The lamp goes out approximately
releasing the switch trigger.
When the tool is overheated, the tool stops
and the lamp starts flashing.
The lamp turns off in
Use a dry cloth to wipe the dirt off the lens of
the lamp. Be careful not to scratch the lens of lamp, or
it may lower the illumination.
Reversing switch action
Reversing switch lever
Always check the direction of
rotation before operation.
Use the reversing switch only after
the tool comes to a complete stop.
direction of rotation before the tool stops may dam-
age the tool.
When not operating the tool,
always set the reversing switch lever to the neu
This tool has a reversing
of rotation. Depress the reversing switch lever from the
A side for clockwise
or from the B side for coun
When the reversing switch lever is in the neutral posi-
tion, the switch trigger cannot be pulled.
Speed change lever
Always set the speed change lever
fully to the correct position.
If you operate the
tool with the speed change lever positioned halfway
between the "1" side and "2" side, the tool may be
Do not use the speed change lever
while the tool is running.
The tool may be damaged.
off the tool first. Push
the speed change lever to display "2" for high speed
or "1" for low speed but high torque. Be sure that the
speed change lever is set to the correct position before
If the tool speed is coming down extremely during the
operation with display "2", push the lever to display "1"
and restart the operation.